Those of you seeking the university of toronto chemical engineering admission requirements and university of toronto chemical engineering masters need not look further as the article below gives you all the information you require and more. You will also find related information on university of toronto mechanical engineering if this is something that may be useful to you.
University of Toronto Chemical Engineering admission is one of the most selective programs in the world. University of Toronto Chemical engineering is located in Canada which has some of the friendliest people around. The program is handled by Chemical and Physical Science faculty at St. George campus. The School is located at two different campuses which are St. George campus and University of Toronto Scarborough campus. You need to know that there are very few schools offering engineering programs at this level. There are no schools offering chemical engineering programs at this level. Be found below university of toronto chemical engineering admission requirements, university of toronto mechanical engineering, university of toronto chemical engineering masters, university of toronto chemical engineering ranking, university of toronto pharmaceutical chemistry University Of Toronto
University Of Toronto Chemical Engineering Graduate Admission
Minimum Admission Requirements
The minimum admission requirements for each program are outlined below. Please note that meeting minimum requirements does not guarantee that an offer of admission will be granted.
M.Eng. Program
A 4-year degree (or equivalent) in engineering or the physical/chemical/biological sciences with at least a mid-B (or equivalent) in each of the last two years of full-time study.
M.A.Sc. Program
A 4-year degree (or equivalent) in engineering or the physical/chemical/biological sciences with a B+ average (or equivalent) in each of the last two years of full-time study.
Ph.D. Program
B+ (or equivalent) in each of the last 2 years of full-time study in the undergraduate program, and successful completion of a research Master’s degree with an overall average of at least B+ (or equivalent).
Entering the PhD Program directly after completing the MASc or MEng
Students who complete an MASc or MEng in the Department of Chemical Engineering and wish to begin a PhD in the department immediately after finishing their master’s, are to apply for PhD admission through the SGS Admission Application System. Please contact the Graduate Assistant for information on the most expedient way to apply for admission.
Entering the PhD Program directly after completing a BEng or BASc (Direct-Entry)
Students who have demonstrated academic excellence in their BEng or BASc studies may enter the PhD program directly after their undergraduate studies. Typically, an applicant must have achieved an A-range average in each of their final 2 years of study, and have participated in a research project, either through an undergraduate thesis or through research conducted in a lab.
Flex-Time PhD
Those interested in applying to the Flex-time PhD program (completing a PhD while concurrently working in the profession) must contact the Graduate Administrator prior to applying
English Language Proficiency Testing
Our English Language Proficiency requirements are different than those mentioned on the SGS Admissions Application System. You are responsible for meeting our requirements as listed below.
Candidates who have completed their studies in any of the following countries are not required to demonstrate English language proficiency:
Australia, Barbados, Botswana, Canada, Ghana, Guyana, Hong Kong, Ireland, Jamaica, Kenya, Lesotho, Liberia, Malawi, Malta, Namibia, New Zealand, Nigeria, Papua New Guinea, Sierra Leone, Singapore, South Africa, Swaziland, Tanzania, Trinidad and Tobago, Uganda, United Kingdom, United States of America, Zambia, and Zimbabwe.
Candidates who have completed their studies in a country not on the above list are required to demonstrate their English language proficiency through one of the tests recognized by the university, even if the language of instruction and examination was English.
MEng Applications
Before starting the application process, carefully review the Minimum Admission Requirements and ensure that you meet all eligibility criteria.
Application dates
For entry in Fall (September) 2022:
- Opens: October 1, 2021 (International and Domestic)
- Closes: March 15, 2022 (International)
- Closes: June 1, 2022 (Domestic)
Application Procedures
Complete the School of Graduate Studies Online Application, and pay the application fee.
Two references are required for MEng applications, and these references are collected electronically through the School of Graduate Studies Online Application. Therefore, we do not accept reference letters (i.e., paper documents) that are sent by mail, email, or fax.
Referees must use an official institutional email address when submitting their reference.
Applicants may submit a scanned copy of their transcripts through the School of Graduate Studies Online Application, and these will be used when considering admission. If admitted, official transcripts will be required before the start of the program. Transcripts are considered official when they have been prepared, sealed in an envelope and signed over the back flap by an official at the issuing institution. Transcripts are to be sent to the Admissions Committee in the Department of Chemical Engineering & Applied Chemistry.
MASC and PhD Applications
Application Deadlines
Entry for Fall (September) 2022:
- February 1, 2022
Entrance Scholarships
All MASc and PhD applicants are encouraged to apply for scholarships in order to make their application more competitive. Please see the Scholarships & Awards information on the SGS website. For applicants, the awards under Government-Funded Awards and International Student Awards will be of particular interest.
All MASc and PhD applicants will automatically be considered for the Colin Hahneman-Bayley Fellowship, which is awarded to an incoming MASc or PhD student based on academic excellence. International applicants whose admission application (including references) are complete by January 10th, 2022 will be considered for the Connaught International Scholarships for Doctoral Students provided they’re nominated by their supervisors.
MASc and PhD Application Procedures
Step 1: Complete the School of Graduate Studies Online Application and pay the application fee by the application deadline. The following items are required in order to submit your application, however are not used when reviewing an application:
- transcripts (unofficial are fine)
- CV
Step 2: Complete the Departmental Online Application. The following items are required in the Departmental Online Application and those submitted through this application are used when reviewing an application, and are visible by potential Supervisors:
- transcripts (unofficial are fine)
- CV
- two references (two academic or one academic and one professional)
If admitted, official transcripts will be required before the start of the program. Transcripts are considered official when they have been prepared, sealed in an envelope and signed over the back flap by an official at the issuing institution. Official transcripts are to be sent to the Admissions Committee in the Department of Chemical Engineering & Applied Chemistry.
Step 3: Find a Supervisor. For MASc and PhD applicants, an offer of admission may only be considered when the applicant both meets admission requirements and has a faculty member that agrees to provide research supervision and financial support. Visit this website’s Research section and faculty listing to explore our professors’ research interests. Applicants are encouraged to approach potential supervisors early in the application process, and may approach more than one faculty member at a time.
university of toronto chemical engineering admission requirements
Academic Requirements
Ontario Secondary School Diploma
Five 4U/M courses, including:
- Advanced Functions (MHF4U)
- Calculus & Vectors (MCV4U)
- Chemistry (SCH4U)
- English (ENG4U)
- Physics (SPH4U)
- Supplemental Application Required
Find equivalent requirements for Canadian high school systems(external link), US high school system(external link), International Baccalaureate(external link), British-Patterned Education(external link), French-Patterned Education(external link), CAPE(external link), and other international high school systems(external link).
university of toronto chemical engineering masters
Program Overview
Research-Based Programs
The research-intensive Master of Applied Science (MASc) and Doctor of Philosophy (PhD) degree programs will challenge and reward students looking for the best education available.
A wide variety of courses are offered in both fundamental and applied areas of chemical engineering. There are excellent computational and experimental facilities where students generally have both office and lab space to call their own. Research supervisors cover all research costs. Please see the research clusters section of the Chemical Engineering website for further details on available research areas.
Professional Master’s Program
The Master of Engineering (MEng) program provides students with advanced professional training in chemical engineering. In as little as one year of study, students can obtain a degree respected by employers that differentiates them in a crowded marketplace.
Students have the opportunity to complete a well-rounded program covering a variety of topics or to further their expertise in areas such as advanced water technology, energy, environmental engineering, health and safety management, as well as core chemical engineering concepts.
Quick Facts
| Domestic | International | |
|---|---|---|
| Application payment deadline | MASc, PhD:1-Feb-2022 Fall 2022 entryMEng:1-June-2022 Fall 2022 entry | MASc, PhD:1-Feb-2022 Fall 2022 entryMEng:1-Mar-2022 Fall 2022 entry |
| Supporting documents deadline | MASc, PhD:15-Feb-2022MEng:15-Jun-2022 | MASc, PhD:15-Feb-2022MEng:15-Mar-2022 |
| Minimum admission average | MASc:B+ average in each of the last two years of full-time studyMEng:Mid-B average in each of the last two years of full-time studyPhD:B+ average in Master’sPhD Direct Entry A- average in the last two years of full-time study | MASc:B+ average in each of the last two years of full-time studyMEng:Mid-B average in each of the last two years of full-time studyPhD:B+ average in Master’sPhD Direct Entry A- average in the last two years of full-time study |
| Direct entry option from bachelor’s to PhD? | PhD:Yes | PhD:Yes |
| Is a supervisor identified before or after admission? | MASc, PhD:Before | MASc, PhD:Before |
| Is a supervisor assigned by the graduate unit or secured by the applicant? | MASc, PhD:Applicant | MASc, PhD:Applicant |
| Program length (full-time only) | MASc:6 sessionsMEng:3 sessionsPhD:4 years; 5 years if entering directly from bachelor’s | MASc:6 sessionsMEng:3 sessionsPhD:4 years; 5 years if entering directly from bachelor’s |
university of toronto mechanical engineering
The Department of Mechanical & Industrial Engineering (MIE) offers two undergraduate programs (Mechanical Engineering and Industrial Engineering) and three graduate programs (Master of Engineering, Master of Applied Science and PhD).
Undergraduate programs
Their undergraduate students learn the principles of their disciplines by attending courses taught by their world-renowned faculty and gain real-world experience working with companies and organizations related to their fields of interest.
The programs consist of four years of coursework during which time the students complete 600 hours of practical training. Many students choose to spend an additional year taking part in the optional Professional Experience Year program, usually between their third and fourth years of study. Graduates of our undergraduate programs receive a Bachelor of Applied Science degree.
Mechanical Engineering (ME)
Mechanical Engineering students can customize their upper years of study by focusing on two of five areas:
- Bioengineering
- Energy & Environment
- Manufacturing
- Mechatronics
- Solid Mechanics & Design
Industrial Engineering (IE)
Industrial Engineering students can customize their upper years of study by selecting technical electives from four areas of academic focus:
- Artificial Intelligence & Machine Learning
- Human Factors
- Operations Research
- Information Engineering
Mechanical Engineering Industrial Engineering
Graduate programs
MIE offers three graduate programs: the professional Master of Engineering (MEng) program and the research-based Master of Applied Science (MASc) and Doctor of Philosophy (PhD) programs.
Master of Engineering (MEng)
- Prepares students for professional practice
- Includes coursework and optional research project
- Full-time program can be completed in one year
- MEng students who wish to pursue a PhD are encouraged to complete a research project
Master of Applied Science (MAsc)
- Thesis based
- Research conducted under supervision of a professor
- MASc students receive funding for up to two years
- Fast-track to PhD options available
- Select applicants will be invited to learn more about research at MIE at the Graduate Research Days
Doctor of Philosophy (PhD)
- Thesis based
- Research conducted under supervision of a professor
- All full time PhD students receive funding
- Flex-time PhD available for working professionals
- Work with world renowned faculty and industry partners
Leave a Reply