texas tech engineering ranking

Last Updated on December 17, 2022 by

Rankings are helpful in determining which is better or worse, but when it comes to Texas Tech Engineering Ranking, it is important to look beneath the surface. When you dig deeper, these rankings provide a better picture of what can be expected when trying to find the right school.

The Texas Tech School of Engineering currently ranks among the top engineering schools in the US, often making it into the rankings of the prestigious U.S. News & World Report magazine . As an accredited engineering school, there are also plenty of opportunities for students to present their research at conferences around the country.

Understanding texas tech engineering ranking could prove to be a challenge sometimes, especially if you do not have prior experience with it to begin with. Getting proper information to back it up may also prove to be a difficult task. 

Not to worry though as this article provides you with the latest information on texas tech university ranking computer science, texas tech tuition, texas tech acceptance rate and texas tech engineering majors. You may also find more current information on texas tech business school ranking in related articles on Collegelearners.

Texas Tech University (Whitacre) Engineering School Overview

The Edward E. Whitacre Jr. College of Engineering at Texas Tech University (Whitacre) has an application deadline of June 1. The application fee is $60 for U.S. residents and $75 for international students. Its tuition is full-time: $5,958 per year (in-state) and full-time: $13,428 per year (out-of-state). The 2019 Ph.D. student-faculty ratio is 2.6:1. The Edward E. Whitacre Jr. College of Engineering at Texas Tech University (Whitacre) has 140 full-time faculty on staff.

Texas Tech Engineering Ranking

Texas Tech University (Whitacre) is ranked No. 94 (tie) in Best Engineering Schools. Schools are ranked according to their performance across a set of widely accepted indicators of excellence.

Engineering School Program Rankings

• #94inBest Engineering Schools (tie)

Texas Tech University’s Graduate School Rankings

• #92inBest Business Schools (tie)
• #124inPart-time MBA (tie)
• #99inBest Education Schools (tie)
• #94inBest Engineering Schools (tie)
  • inChemical Engineering
  • inCivil Engineering
  • inElectrical / Electronic / Communications Engineering
  • inIndustrial / Manufacturing / Systems Engineering
  • inMechanical Engineering
  • #9inPetroleum Engineering
• #111inBest Law Schools (tie)
  • inBusiness/Corporate Law
  • inClinical Training
  • inConstitutional Law
  • inContracts/Commercial Law
  • inCriminal Law
  • inDispute Resolution
  • inEnvironmental Law
  • inIntellectual Property Law
  • inInternational Law
  • inLegal Writing
  • inTax Law
  • inTrial Advocacy
• #190inBiological Sciences (tie)
• #122inChemistry (tie)

Texas Tech Engineering Ranking

Why is Texas Tech ranked so low?

Texas Tech fell 11 spots in the most recently released U.S. News & World Report rankings of the top national universities, a drop that Tech’s president attributed to a change in methodology that is meant to emphasize student outcomes, such as graduation rates.

What are good things about Texas Tech?

The best thing about Texas Tech is its relaxed environment and the quality of the education here is excellent. The Spanish-Renaissance architecture is one you won’t find on other campuses. This architecture is unique to Texas Tech and it makes for a beautiful campus. Each building on campus looks very similar.

texas tech engineering requirements

Undergraduate Admissions

Overview

The engineering degree programs within the Whitacre College of Engineering consist of a first-year student foundational curriculum followed by an upper-division program that includes courses taken in the sophomore, junior, and senior years. Upon completion of the foundational curriculum, a student must apply and be successfully admitted to a Whitacre College upper-division degree program. Students who are not successfully admitted to an upper-division degree program must transfer out of the college.

First-Year Student Admission to the Whitacre College Foundational Curriculum

Beginning Fall 2020, the Whitacre College of Engineering began a common engineering core (CEC) for all engineers and computer scientists.  This block of courses is designed to introduce students to concepts and fundamentals that will be necessary in upper division courses.  The CEC comprises the foundational curriculum that all students must complete before taking upper division (junior – 3000 level and senior – 4000 level) courses.  The CEC includes ENGR 1110 (Engineering Seminar), ENGR 1320 (Bio-Inspired Design for Engineers), ENGR 1330 (Computational Thinking with Data Science), ENGR 2392 (Engineering Ethics and Its Impact on Society), CHEM 1307/1107 (Principles of Chemistry I AND the lab), PHYS 1408 (Principles of Physics I), ENGL 1301 (Essentials of College Rhetoric), ENGL 1302 (Advanced College Rhetoric), MATH 1451 (Calculus 1 with Applications), and MATH 1451 (Calculus 1 with Applications).

For a first-year student entering prior to January 2013, the criterion for admission to the Whitacre College Foundational Curriculum requires that the student must have the academic preparation necessary to begin an engineering degree program. Specifically, a student must be qualified to enroll in MATH 1451 (Calculus I) or higher.

Effective January 2013 and later, the criterion for admission to the Whitacre College Foundational Curriculum requires that a first-year student or transfer student with fewer than 12 hours of transfer credit must be accepted to the university with assured admission status. Students who are assured admit and not TSI compliant will be admitted to Texas Tech as a University ExploreSTEM student. The criteria used to determine assured admission status are SAT/ACT scores and class rank as shown in the undergraduate admission section of this catalog and summarized below.

University ExploreSTEM

Students who do not meet the assured admissions requirements may enter the ExploreSTEM Program and then work to qualify as a Foundational Curriculum Engineering Student. Students who are assured admit and not TSI compliant will be admitted to Texas Tech as a ExploreSTEM student. Upon completion of the Foundational Curriculum, a student must apply and be successfully admitted to a Whitacre College of Engineering upper-division degree program. Students who are not successfully admitted to an upper-division degree program must transfer out of the college.

The Whitacre College of Engineering has partnered with Texas Tech University Advising to create the TTU ExploreSTEM Program, a student retention and success initiative that provides intense academic advising and support as students build the requisite math skills to be successful in an engineering degree program. While in ExploreSTEM, students will enroll in normal university core curriculum and foundational math courses.

Engineering presents an extremely challenging course of study. For students who determine that engineering is not an appropriate choice, the advisors in University Advising have the specialized training and are equipped with the tools necessary to assist students in finding a course of study that is best suited to their unique talents and interests. The ultimate priority is for every student to graduate successfully from a best-fit major.

Admission to a Whitacre College of Engineering Degree Program

All new admissions to the Whitacre College initially work to complete a foundational curriculum consisting of English I, English II, Calculus I, and Calculus II plus two science courses and a first engineering course that vary among the engineering degree programs. The foundational curriculum is supplemented with courses from the university core curriculum and first general engineering courses (statics, thermodynamics, circuits, and materials science) to provide the opportunity for full course loads and scheduling flexibility.

When the foundational curriculum has been completed, students apply for admission to the upper division of their degree program. The acceptance criterion is based exclusively on a Texas Tech cumulative GPA that includes a minimum of 12 hours of coursework from the foundational curriculum. The specific GPA standard varies among the degree programs and may change from one academic year to the next as necessary to align enrollments with the educational resources.

Students must be prepared to make an alternate choice of major if their foundational curriculum GPA does not qualify them for their preferred major. Students who are not successfully admitted to an upper-division degree program are not allowed to enroll in engineering courses and must transfer out of the Whitacre College.

Transfer Students

Placement Exams

Math Placement Exam (MPE)

Placement in entry-level mathematics courses (0301-2322) is based on:

1. Appropriate previous prerequisite collegiate mathematics credit, or
2. Results of the departmentally administered MPE at Texas Tech

The exam can be taken on the math website at www.math.ttu.edu/placement and can also be retaken.

Students without appropriate prerequisite collegiate mathematics credit will be placed into entry-level courses based on the results of the MPE.

Chemistry Placement Exam (CPE)

Any student required to take CHEM 1307 (Principles of Chemistry I) must take the Texas Tech University Chemistry Placement Examination (CPE). Options available based upon the CPE score are discussed on the CHEM 1307 Assessment Results webpage.

Choosing High School Courses

What courses do I take in high school if I want to be an engineer?

Engineering coursework at Texas Tech University builds on a strong academic foundation of English, Mathematics, Science, Social Studies, and other disciplines in high schools. View this guide, Preparing for a Degree in Engineering: Suggested Courses for High School Students to get advice on a suggested course flow that will help you to build a strong academic foundation in high school and prepare you for your time at Texas Tech as a Red Raider!

2+2 Program

Transfer students represent a key component of the Whitacre College of Engineering’s student population. That’s why we teamed up with community colleges throughout Texas to make it easier for students to transfer their work to Texas Tech University through our 2+2 programs. These programs allow students to complete key lower-division course a community college and through distance education. In this way, when students arrive, previous work will transfer smoothly and it is easier to begin upper-level courses. To find out more details about the program, please speak to your local community college advisors.

texas tech engineering program

Engineering Degrees

* Accredited by the Engineering Accreditation Commission of ABET.
** Accredited by the Computing Accreditation Commission of ABET.
‡ Not a Master of Science degree